SSC JE

1
TO BE PUBLISHED IN THE EMPLOYMENT NEWS / ROZGAR SAMACHAR DATED 11-07-2015
STAFF SELECTION COMMISSION
NOTICE
JUNIOR ENGINEERS (CIVIL, MECHANICAL, ELECTRICAL,QUANTITY SURVEYING & CONTRACT) EXAMINATION, 2015
Date of Exam: 06-12-2015 Closing Date: 10-08-2015
“GOVERNMENT STRIVES TO HAVE A WORKFORCE WHICH REFLECTS GENDER BALANCE AND WOMAN CANDIDATES ARE ENCOURAGED TO APPLY.”
F.No. 3/4/2015- P&P-II: Staff Selection Commission will hold on 06-12-2015, an open competitive examination for recruitment of   Junior Engineers, Group ‘B’ Non-Gazetted posts in the Pay Band of Rs.9300-34800/- plus Grade Pay Rs.4200/-.
2. Posts and vacancies: S.No. Organisation Post 1. Central Water Commission Junior Engineer (Civil) 2. Central Water Commission Junior Engineer (Mechanical) 3. CPWD Junior Engineer (Civil) 4. CPWD Junior Engineer (Electrical) 5. Department of Post Junior Engineer (Civil) 6 Department of Post Junior Engineer (Electrical)
7. MES Junior Engineer(Civil) 8 MES Junior Engineer(Electrical and Mechanical) 9. MES Junior Engineer(`Quantity Surveying and Contract)
There are, tentatively, about 1000 vacancies. The vacancies are subject to change.
3. Reservation:
Reservation for SC/ ST/ OBC/ ExS/ PH etc. categories is available as per extant Govt. Orders and as communicated by the departments reporting vacancies.
The posts have been identified suitable for the persons suffering from disabilities of forty percent (40%) and above of One Arm (OA), One Leg (OL), Both Legs (BL), Partially Deaf (PD) and Deaf (D).
4. Nationality / citizenship:
A candidate must be either: (a)  a citizen of India, or (b)  a subject of Nepal, or (c)  a subject of Bhutan, or (d)  a Tibetan refugee who came over to India before the 1st January 1962 with the intention of permanently settling in India, or
1
TO BE PUBLISHED IN THE EMPLOYMENT NEWS / ROZGAR SAMACHAR DATED 11-07-2015
STAFF SELECTION COMMISSION
NOTICE
JUNIOR ENGINEERS (CIVIL, MECHANICAL, ELECTRICAL,QUANTITY SURVEYING & CONTRACT) EXAMINATION, 2015
Date of Exam: 06-12-2015 Closing Date: 10-08-2015
“GOVERNMENT STRIVES TO HAVE A WORKFORCE WHICH REFLECTS GENDER BALANCE AND WOMAN CANDIDATES ARE ENCOURAGED TO APPLY.”
F.No. 3/4/2015- P&P-II: Staff Selection Commission will hold on 06-12-2015, an open competitive examination for recruitment of   Junior Engineers, Group ‘B’ Non-Gazetted posts in the Pay Band of Rs.9300-34800/- plus Grade Pay Rs.4200/-.
2. Posts and vacancies: S.No. Organisation Post 1. Central Water Commission Junior Engineer (Civil) 2. Central Water Commission Junior Engineer (Mechanical) 3. CPWD Junior Engineer (Civil) 4. CPWD Junior Engineer (Electrical) 5. Department of Post Junior Engineer (Civil) 6 Department of Post Junior Engineer (Electrical)
7. MES Junior Engineer(Civil) 8 MES Junior Engineer(Electrical and Mechanical) 9. MES Junior Engineer(`Quantity Surveying and Contract)
There are, tentatively, about 1000 vacancies. The vacancies are subject to change.
3. Reservation:
Reservation for SC/ ST/ OBC/ ExS/ PH etc. categories is available as per extant Govt. Orders and as communicated by the departments reporting vacancies.
The posts have been identified suitable for the persons suffering from disabilities of forty percent (40%) and above of One Arm (OA), One Leg (OL), Both Legs (BL), Partially Deaf (PD) and Deaf (D).
4. Nationality / citizenship:
A candidate must be either: (a)  a citizen of India, or (b)  a subject of Nepal, or (c)  a subject of Bhutan, or (d)  a Tibetan refugee who came over to India before the 1st January 1962 with the intention of permanently settling in India, or
1
TO BE PUBLISHED IN THE EMPLOYMENT NEWS / ROZGAR SAMACHAR DATED 11-07-2015
STAFF SELECTION COMMISSION
NOTICE
JUNIOR ENGINEERS (CIVIL, MECHANICAL, ELECTRICAL,QUANTITY SURVEYING & CONTRACT) EXAMINATION, 2015
Date of Exam: 06-12-2015 Closing Date: 10-08-2015
“GOVERNMENT STRIVES TO HAVE A WORKFORCE WHICH REFLECTS GENDER BALANCE AND WOMAN CANDIDATES ARE ENCOURAGED TO APPLY.”
F.No. 3/4/2015- P&P-II: Staff Selection Commission will hold on 06-12-2015, an open competitive examination for recruitment of   Junior Engineers, Group ‘B’ Non-Gazetted posts in the Pay Band of Rs.9300-34800/- plus Grade Pay Rs.4200/-.
2. Posts and vacancies: S.No. Organisation Post 1. Central Water Commission Junior Engineer (Civil) 2. Central Water Commission Junior Engineer (Mechanical) 3. CPWD Junior Engineer (Civil) 4. CPWD Junior Engineer (Electrical) 5. Department of Post Junior Engineer (Civil) 6 Department of Post Junior Engineer (Electrical)
7. MES Junior Engineer(Civil) 8 MES Junior Engineer(Electrical and Mechanical) 9. MES Junior Engineer(`Quantity Surveying and Contract)
There are, tentatively, about 1000 vacancies. The vacancies are subject to change.
3. Reservation:
Reservation for SC/ ST/ OBC/ ExS/ PH etc. categories is available as per extant Govt. Orders and as communicated by the departments reporting vacancies.
The posts have been identified suitable for the persons suffering from disabilities of forty percent (40%) and above of One Arm (OA), One Leg (OL), Both Legs (BL), Partially Deaf (PD) and Deaf (D).
4. Nationality / citizenship:
A candidate must be either: (a)  a citizen of India, or (b)  a subject of Nepal, or (c)  a subject of Bhutan, or (d)  a Tibetan refugee who came over to India before the 1st January 1962 with the intention of permanently settling in India, or
2
(e)  a person of Indian origin who has migrated from Pakistan, Burma, Sri Lanka, East African countries of Kenya, Uganda, the United Republic of Tanzania(Formerly Tanganyika and Zanzibar), Zambia, Malawi, Zaire, Ethiopia and Vietnam with the intention of permanently settling in India.
Provided that a candidate belonging to categories (b), (c), (d) and (e) above shall be a person in whose favour a certificate of eligibility has been issued by the Government of India.
A candidate in whose case a certificate of eligibility is necessary may be admitted to the Examination but the offer of appointment will be given only after the necessary eligibility certificate has been issued to him by the Government of India.
4-A. Age Limit as on 1stAugust 2015.
S.No. Organisation Name Post name Age 1. Central Water Commission Junior Engineer(Civil) Upto 32 years 2. Central Water Commission Junior Engineer(Mech) Upto 32 years 3. CPWD Junior Engineer(Civil) Not exceeding 32 years. 4. CPWD Junior Engineer (Electrical) Not exceeding 32 years 5. Department of Post Junior Engineer(Civil) 18-27 years 6 Department of Post Junior Engineer (Electrical) 18-27 years
7. MES Junior Engineer(Civil) Not exceeding 30 years. 8 MES Junior Engineer (Electrical and Mechanical) Not exceeding 30 years. 9. MES Junior Engineer(Surveying and Contract) 18-27 years.
Candidates should note that the Date of Birth as recorded in the Matriculation/Secondary Examination Certificate or an equivalent certificate only will be accepted by the Commission for determining the age and no subsequent request for its change will be considered or granted.
Candidates are advised to opt only for such posts for which they have the qualification and are within the prescribed age limits. Permissible relaxation of upper age limit prescribed under para 4-A above and Category Codes for claiming age relaxation as on date of reckoning:-
Code Category Age-Relaxation Permissible beyond the Upper age limit 01 SC/ST 5 years 02 OBC 3 years 03 PH (OH/HH) 10 years 04 PH(OH/HH)  + OBC 13 years 05 PH(OH/HH) + SC/ST 15 years 06 Ex-Servicemen (Unreserved / General) 03 years after deduction of the military service rendered from the actual age as on the closing date. 07 Ex-Servicemen (OBC) 06 years (3 years + 3 years)
3
after deduction of the military service rendered from the actual age as on the closing date. 08 Ex-Servicemen (SC/ ST) 08 years ( 3 years + 5 years ) after deduction of the military service rendered from the actual age as on the closing date. 12 Central Govt. Civilian Employees (General/Unreserved) who have rendered not less than 3 years regular and continuous service as on Closing date. 05 Years 13 Central Govt. Civilian Employees (OBC) who have rendered not less than 3 years regular and continuous service as on Closing date. 08 (5+3) years. 14 Central Govt. Civilian Employees ( SC/ST ) who have rendered not less than 3 years regular and continuous service as on Closing date 10 ( 5+5) years 21 Candidates who had ordinarily been domiciled in the State of Jammu & Kashmir (Unreserved/General ) 5 years 22 Candidates who had ordinarily been domiciled in the State of Jammu & Kashmir ( OBC ) 8 years 23 Candidates who had ordinarily been domiciled in the State of Jammu & Kashmir (SC/ST) 10 years 27 Defence Personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a consequence thereof (Unreserved/General) 5 years 28 Defence Personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a consequence thereof ( OBC ) 8 (5+3) years 29 Defence Personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a consequence thereof ( SC/ST ) 10 (5+5) years
Ex-Servicemen who have already secured employment in civil side under Central Government on regular basis after availing of the benefits of reservation given to ex-servicemen for their re- employment are NOT eligible for fee concession.
The period of "Call up Service" of an Ex-Serviceman in the Armed Forces shall also be treated as service rendered in the Armed Forces for purpose of age relaxation, as per rules.
The post of Junior Engineer being a Group ‘B’ post, there is no reservation for Ex-Servicemen category.  However, benefit of age-relaxation will be admissible to Ex-Servicemen candidates, as per extant Govt. Orders. An  ex-seriveman means a person:- (i) who has served in any rank whether as a combatant or non combatant in the Regular Army, Navy andAir Force of the Indian Union, and(a) who either has been retired or relieved or discharged from such service whether at his own request or being relieved by the employer after earning his or her pension, or
4
(b) who has been relieved fromsuch service on medical grounds attributable to military service or circumstances beyond his control and awarded medical or other disability pension; or(c) who has been released from such service as a result of reduction in establishment. or(ii) who has been released from such service after completing the specific period of engagement, otherwise than at his own request, or by way of dismissal, or discharge on account of misconduct or inefficiency and has been given a gratuity, and includes personnel ofthe Territorial Army, namely pension holders for continuous embodied service or broken spells of qualifying service. or(iii) personnel of the Army Postal Service who are part of Regular Army and retired from the Army Postal Service without reversion to their parent service with pension, or are released from the Army Postal service on medical grounds attributable to or aggravated by military service or circumstance beyond their control and awarded medical or other disability pension. or(iv) Personnel, whowere on deputation in Army Postal Service for more than six months prior to the 14thApril, 1987. or(v) Gallantry award winners of the Armed forces including personnel of Territorial Army. or(vi) Ex-recruits boarded out or relieved on medical ground and granted medical disability pension.5 . Process of certification and format of certificates:
Candidates who wish to be considered against vacancies reserved or seek age-relaxation must submit requisite certificate from the competent authority, in the prescribed format, whenever such certificates are sought by concerned Regional/Sub Regional Offices at the time of Interview/Document Verification. Otherwise, their claim for SC/ ST/ OBC/ PH/ ExS status will not be entertained and their candidature/ applications will be considered under General (UR) category. The formats of the certificates are annexed. Certificates in any other format will not be accepted. OBC certificate in the prescribed format issued between 11.08.2012 and upto 06-02-2016 only will be accepted.
Candidates are warned that they may be permanently debarred from the examination conducted by the Commission in case they fraudulently claim SC/ST/OBC/ExS/PH status.
6. Essential Educational Qualifications (as on 01-08-2015):
S. No. Post Educational and Other Qualification 1 Junior Engineer (Civil), CPWD Diploma in Civil Engineering from a recognized University or Institute. 2 Junior Engineer(Electrical) CPWD Diploma in Electrical or Mechanical Engineering from a recognised University or Institute. 3 Junior Engineer (Civil), Department of Posts Three years Diploma or equivalent in Civil Engineering from an institution recognized by the Central Government or State Government. 4 Junior Engineer(Electrical) Department of Posts. Three years Diploma or equivalent in Electrical Engineering from an institution recognized by the Central Government or State Government.
5
5 (a) Junior Engineer (Civil), MES
(b) Junior Engineer (Electrical & Mechanical), MES
(c)Junior Engineer(QS&C) MES
Degree in Civil Engineering from a recognised University OR I)Three years Diploma in Civil Engineering from a recognised Institute or University or Board; and
(II) Two years experience in Planning, Execution and Maintenance of Civil Engineering works.
Degree in Electrical or Mechanical Engineering from a recognised University; OR (I) Three years diploma in Electrical or Mechanical Engineering from a recognised Institute or University or  Board; and
(II) Two years experience in Planning, Execution and Maintenance of Electrical or Mechanical Engineering works.
(i)3 years Diploma in Civil engineering from a recognised institute/University/Board or equivalent; OR (ii) Passed Intermediate examination in Building and Quantity Surveying Sub Divisional -II of the institute of Surveyors (India).
6 Junior Engineer (Civil  and Mechanical), Central Water Commission
Degree or Diploma in Civil or Mechanical Engineering from a recognised University or Institution
For list of equivalent qualifications as approved by CPWD/AICTE, refer to Annexure-X.
As per Ministry of Human Resource Development Notification No. 44 dated 01.03.1995 published in Gazette of India edition dated 08.04.1995, the Degree obtained through open Universities/Distance Education Mode needs to be recognized by Distance Education Council, IGNOU.  Accordingly, unless such Degrees had been recognized for the period when the candidates acquired the relevant qualification, they will not be accepted for the purpose of Educational Qualification.
All candidates who are called for appearing at the Interview will be required to produce the relevant Certificates in Original such as Mark sheets, Provisional Degree/Diploma Certificate, etc. as proof of having acquired the minimum educational qualification on or before 01-08-2015 failing which the candidature of such candidate will be cancelled by the Commission. The candidates who are able to prove, by documentary evidence that the result of the qualifying examination was declared on or before the cut off date and he/she has been declared passed, will also be considered to have met the required Educational Qualification.
ExS who have done various courses from Armed Forces which are certified by competent Authority to be equivalent to Diploma in Civil/Mechanical/Electrical Engineering are eligible to appear in the Examination.
6
7.    Mode of payment of fee payable Rs.100/- (Rupees One Hundred only):
Candidate may note that only on line applications will be accepted at http://ssconline.nic.in and http://ssconline2.gov.in
Fee paid in respect of online applications through SBI Challan /Net banking and any credit and debit cards will be accepted.
Women candidates and candidates belonging to Scheduled Caste, and Scheduled Tribes, Physically handicapped and Ex-Servicemen eligible for reservation are exempted from paying fee, as per rules/instructions of Department of Personnel and Training, Government of India.
Fee once paid will not be refunded under any circumstances.
8. Centres of Examination:
A candidate must indicate clearly the centres of examination in the Application Form.  A candidate must submit his/her application only to the concerned Regional/Sub Regional Office of the Commission under whose jurisdiction the centre selected by him/her falls. Application received in another Regional/Sub Regional Office of the Commission will be rejected summarily.
The applications should be addressed to the Regional / Sub-Regional Offices of the Commission as indicated in the table below:
S.No. Centre of Examination & Centre Code
Regional/Sub-Regional office
1 Dehradun-2002, Delhi-2201, Jaipur-2405,
Regional Director (NR), Staff Selection Commission, Block No. 12, CGO Complex, Lodhi Road, New Delhi-110504.
2 Hyderabad-8002, Vishakhapatnam-8007, Chennai-8201, Pondicherry-8401,
Regional Director (SR), Staff Selection Commission, EVK Sampath Building, 2nd Floor, College Road, Chennai, Tamil Nadu-600006.
3 Gangtok-4001, Ranchi-4205, Kolkata-4410, Bhubaneswar-4604, Port Blair-4802,
Regional Director (ER), Staff Selection Commission, Nizam  Palace, Ist M.S.O. Building (8th Floor), 234/4  A. J. C. Bose Road, Kolkata, West Bengal – 700020
4. Ahmedabad -7001 Mumbai-7204, Nagpur-7205, Panaji-7801,
Regional Director (WR), Staff Selection Commission, Ist Floor, South Wing, Pratishta Bhawan, 101 Maharshi Karve Road, Mumbai Maharashtra – 408020.
5. Allahabad-3003, Lucknow-3010 Patna-3206,
Regional Director (CR), Staff Selection Commission, 21-23 Lowther Road, Allahabad, Uttar Pradesh – 211002.
6. Itanagar- 5001, Guwahati (Dispur)-5105,
Regional Director (NER), Staff Selection Commission,
7
Imphal-5501, Kohima-5302, Shillong-5401, Churachandpur-5502 Agartala-5601, Aizwal-5701,
Housefed Complex,West End Block, Last Gate, Beltola Basistha Road, Dispur Guwahati, Assam-781006.
7. Bengaluru-9001, Thiruvananthapuram-9211, Kavaratti-9401
Regional Director (KKR), Staff Selection Commission, 1St Floor, “E” Wing,  Kendriya Sadan, Koramangala, Bangalore, Karnataka-560034.
8. Bhopal-6001, Jagdalpur-6203, Raipur-6204,
Dy. Director (MPR), Staff Selection Commission, J-5 Anupam Nagar, Raipur Chhatisgarh-492001.
9. Baramula-1002, Jammu-1004, Srinagar (J&K)-1007, Shimla-1203, Chandigarh-1601,
Dy. Director (NWR), Staff Selection Commission, Block No. 3, Ground Floor, Kendriya Sadan Sector-9, Chandigarh-167017.
No change of Centre of Examination will be allowed under any circumstances.  Hence, the candidates should select the centres carefully and indicate the same correctly in their applications. The Commission considers only applications supported by documentary evidence from those serving in Armed Forces or Central Armed Police Forces for change of centre, if they are posted out due to operational reasons.
The Commission reserves the right to cancel any Centre and ask the candidates of that centre to appear from another centre.  Commission also reserves the right to divert candidates of any centre to some other Centre to take the examination.
9. Scheme of Examination:
The examination will be conducted in two stages:
A. Written Test        (500 marks)
B.       Interview ( 100 marks)
A. Written Test:
Papers Subject Maximum Marks
Duration & Timings
Paper-I Objective type
(Date of Examination 06-12-2015)
(i)    General Intelligence & Reasoning (ii)    General Awareness (iii)   Part –A General Engineering (Civil & Structural) OR Part-B General Engineering (Electrical) OR
50
50
100
2 Hours
Morning shift [10.00 AM to 12.00 Noon]
Afternoon Shift [2.00 PM to 4.00 PM]
Note: Entry to the examination venue will not be allowed after 9.30
8
Part-C General Engineering (Mechanical)
AM in the morning shift and after 1.30 PM in the afternoon shift.
Paper-II Conventional Type
Part-A General Engineering  (Civil & Structural) OR Part- B General Engineering (Electrical) OR Part-C    General Engineering (Mechanical)
300
2 Hours
Date to be intimated later on.
The Commission reserves the right to hold the written examination on line.
In Paper-I and Paper-II for General Engineering, the candidate will be required to attempt only the part as per option given in column 13 of the application form filled by the candidate. In other words, the candidates appearing for the post of Junior Engineer (Civil), Junior Engineer(Quantity Surveying & Contract) should attempt Part A (Civil & Structural) of Paper-I and Paper-II and the candidates appearing for the post of Junior Engineer (Electrical) should attempt Part-B (Electrical) and the candidates appearing for the post of  Junior Engineer (Mechanical) should attempt Part C (Mechanical) of Paper-I and Paper-II failing which his/her answer sheet  will not be evaluated.
Candidates are allowed to bring their own Slide–Rule, Calculator, Logarithm Tables and Steam Table for Paper-II only.  They are not allowed to use such aids for Paper-I.
Paper-I will consist of Objective Type Multiple Choice questions only. Candidates who are shortlisted on the basis of performance in Paper –I will be called for Paper-II (Conventional Type).
Candidates are not permitted to use Mobile Phone or any other electronic / electrical device other than those specifically permitted.  Candidates must not, therefore, bring Mobile Phone or any other electronic /electrical device not specifically permitted inside the Examination premises.   Possession of these items, whether in use or not, will be considered as “use of unfair means” in the Examination and candidature of such candidates will be cancelled forthwith. Such candidates are also liable for debarment upto a period of 3 years and/or criminal prosecution.
There will be negative marking of 0.25 marks for each wrong answer in Paper-I. Candidates are, therefore, advised to keep this in mind while answering the questions.
Commission will place the answer keys of Paper-I on its website after the examination. Objections and claims if any, received within the time limit specified while placing answer keys will be examined by the Commission with the help of experts, if necessary. Commission’s decision in this regard will be final.
B. Interview:                                                  100 marks
The candidates shortlisted on the basis of performance in Paper-I and Paper-II will be called for interview.  The interview will be held at places as may be decided by the Commission.
9
SC/ST candidates called for interview will be paid TA as per Government Orders.  However, no TA is payable to any candidate for appearing in the written examination.
Canvassing in any form whatsoever will lead to cancellation of the candidates.
10. Indicative Syllabus
The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical) from a recognized Institute, Board or University recognized by All India Board of Technical Education.  All the questions will be set in SI units.  The details of the syllabus are given below:
Paper-I
(i) General Intelligence & Reasoning: The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgement, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series etc. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.
(ii) General Awareness: Questions will be aimed at testing the candidate’s general awareness of the environment around him/her and its application to society.  Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person.  The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc.  These questions will be such that they do not require a special study of any discipline.
(iii) General Engineering (Civil and Structural), (Electrical & Mechanical):
Part-A Civil Engineering
Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering.
Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design.
Part-B
Electrical Engineering
Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics.
10
Part-C
Mechanical Engineering – Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials,
Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication,  Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines.
Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steels.
Paper II ( Part-A) : Civil  & Structural Engineering
Civil Engineering
Building Materials : Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes.
Estimating, Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering.  Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpson’s rule.  Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps.  Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.
Surveying : Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment.
Soil Mechanics : Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses.  Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart.  Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement.  Shear strength of soils, direct shear test, Vane shear test, Triaxial test.  Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content,
11
earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.
Hydraulics : Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.
Irrigation Engineering: Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc.  Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command  area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies.  Different type of canals, types of canal irrigation, loss of water in canals.  Canal lining – types and advantages.  Shallow and deep to wells, yield from a well.  Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity.  Lacey’s theory of uniform flow.  Definition of flood, causes and effects, methods of flood control, water logging, preventive measure.  Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes.  Major irrigation projects in India.
Transportation Engineering: Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards.  Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.
Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments.  Surface water drainage.  Solid waste management – types, effects, engineered management system.  Air pollution – pollutants, causes, effects, control.  Noise pollution – cause, health effects, control.
Structural Engineering
Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams.  Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.
Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.
RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams.  T-beams, lintels.  One way and two way
12
slabs, isolated footings.  Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).
Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders.
Part-B (Electrical Engineering):
Basic concepts : Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units. Circuit law : Kirchhoff’s law, Simple Circuit solution using network theorems. Magnetic Circuit : Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self and mutual induction.
AC Fundamentals: Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit.  Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.
Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement.  Measurement of frequency and phase angle.  Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter,  Multimeters, Megger, Energy meter AC Bridges.  Use of CRO, Signal Generator, CT, PT and their uses.  Earth Fault detection.
Electrical Machines : (a) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors.  Method of braking motor, Losses and efficiency of D.C. Machines.  (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency.  Effect of voltage, frequency and wave form on losses.  Parallel operation of 1 phase /3 phase transformers.  Auto transformers.  (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors.  Methods of braking, effect of voltage and frequency variation on torque speed characteristics.
Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications.
Synchronous Machines - Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power.  Starting and applications of synchronous motors.
Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations.  Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc.  Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars.  Lightning arresters,
13
various transmission and distribution system, comparison of conductor materials, efficiency of different system.  Cable – Different type of cables, cable rating and derating factor.
Estimation and costing : Estimation of lighting scheme, electric installation of machines and relevant IE rules.  Earthing practices and IE Rules.
Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors.
Basic Electronics : Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices.
Part- C (Mechanical Engineering):
Theory of Machines and Machine Design
Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots.
Engineering Mechanics and Strength of Materials
Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns –Euler’s and Rankin’s theories, Thin walled pressure vessels.
Thermal Engineering
Properties of Pure Substances : p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status.  Definition of dryness fraction of steam, degree of superheat of steam. H-s chart of steam (Mollier’s Chart).
1st Law of Thermodynamics : Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation. 2nd Law of Thermodynamics : Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes.   Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility.
Air standard Cycles for IC engines : Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.
IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication. Rankine cycle of steam : Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work.
14
Boilers; Classification; Specification; Fittings & Accessories : Fire Tube & Water Tube Boilers.
Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeraton Plant; Nozzles & Steam Turbines
Fluid Mechanics & Machinery
Properties & Classification of Fluid : ideal & real fluids, Newton’s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids.
Fluid Statics : Pressure at a point.
Measurement of Fluid Pressure : Manometers, U-tube, Inclined tube.
Fluid Kinematics : Stream line, laminar & turbulent flow, external & internal flow, continuity equation.
Dynamics of ideal fluids : Bernoulli’s equation, Total head; Velocity head; Pressure head; Application of Bernoulli’s equitation.
Measurement of Flow rate Basic Principles : Venturimeter, Pilot tube, Orifice meter.
Hydraulic Turbines : Classifications, Principles.
Centrifugal Pumps : Classifications, Principles, Performance.
Production Engineering
Classification of Steels : mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.
11. General instructions to be complied by the candidates in  the written examination:
Candidates must write the papers/indicate the answers in their own hand.
Candidates are not permitted to use electronic gadgets except as specified in the Notice. They should not, therefore, bring the same inside the Examination Premises / Venue for papers for which their use is not permitted.
If any candidate is found to possess mobile phones or any other means of wireless communication in the working or switched off mode, his/her candidature shall be cancelled forthwith and he/she will be debarred form the Commission’s examination for a period of three years.
15
Wherever applicable, the candidates must indicate /write the answer either in Hindi or in English.  If answers are indicated/written partly in Hindi and partly in English and vice versa, the Answer script will not be evaluated.
In the question papers, wherever necessary, the Metric systems of weights and measures only will be used.
OMR Type of Answer Sheets will be supplied by the Commission to candidates for recording their answers of Multiple Choice Objective Type Questions.  Candidates are advised to read very carefully, the instructions, placed on the Commission’s website (Candidate’s Corner), and instructions on OMR sheets/Question Papers in their own interest. Model OMR sheet is also provided on the website to enable the candidates to practice proper marking of the answers in objective type papers.
Part A and Part B of OMR answer sheet to be filled in dark blue/black ball point pen only.
Candidate should write his/her name, Roll Number, Ticket Number and Test Form Number correctly, in the relevant places in OMR Answer Sheet. Answer Sheet not bearing candidate’s Name, Roll Number, Test Form Number, Signature and left hand thumb impression or improper/ incomplete coding of these details will not be evaluated. The Commission prima-facie considers mistakes in such details/coding as attempt to commit malpractice in the examination or to impersonate. Candidates are advised to follow these instructions meticulously and ensure that the above details are duly and fully coded in the appropriate places.
12. Mode of Selection:
Candidates will be shortlisted for Interview on the basis of their total marks in the Written Examination in Paper- I&II. Candidates will be recommended for appointment by the Commission on the basis of total marks in the Written Examination and Interview.
Provided that SC, ST, OBC and PH (OH/HH) candidates, who are selected on their own merit without relaxed standards, along with candidates belonging to  other communities, will not be adjusted against the reserved share of  vacancies.  Such SC, ST, OBC and PH candidates will be accommodated against the general/unreserved vacancies as per their position in the overall Merit List. The reserved vacancies will be filled up separately from amongst the eligible SCs, STs, OBCs and PH candidates which will thus comprise of SC, ST, OBC and PH candidates who are lower in merit than the last general candidate on merit list of unreserved category but otherwise found suitable for appointment even by relaxed standard.  A Physically Handicapped candidate who qualifies on the basis of relaxed standards viz., age limit, experience or qualifications, permitted number of chances in written examination, extended zone of consideration, etc. will be counted against reserved vacancies and not against general vacancies subject to fitness of such candidate for selection.   Such candidates may also be recommended at the relaxed standards to the extent the number of vacancies reserved for them, to make up for the deficiency in the reserved quota, irrespective of their rank in the order of merit.
Success in the examination confers no right of appointment unless government is satisfied after such enquiry as may be considered necessary that the candidate is suitable in all respects of appointment to the service/post.
16
The candidates applying for the examination should ensure that they fulfil all the eligibility conditions for admission to the examination.  Their admission at all the stages of examination will be purely provisional, subject to their satisfying the prescribed eligibility conditions.   If, on verification, at any time before or after the written examination and skill test, it is found that they do not fulfil any of the eligibility conditions, their candidature for the examination will be cancelled by the Commission.
Candidates, who are appointed on the basis of this examination, shall be on probation for a period of two years and during the period of probation, the candidates would be required to undergo such training or pass such examinations as prescribed by the Controlling Authority. On successful completion of the period of probation, the candidates shall, if considered fit for permanent appointment, be confirmed to their post by the Controlling Authority.
13. Resolution of tie cases: In cases where more than one candidate secure the equal aggregates marks, tie will be resolved by applying the following methods one after another:-
(i) Total marks in written examination. (ii) Marks in Paper-II. (iii) Marks in Paper-I. (iv) Date of birth, with older candidates placed higher. (v)  Alphabetical order in the first names of the candidates appear.
14. How to apply:
All applications must be submitted online only. For detailed instructions relating to the application form and how the application is to be submitted, Annexure – II A may be referred to.
15. Preferences for Posts &Departments/Offices
A candidate is required to indicate at Sl. No. 15 in his/her Application Form, name of Post for which he/she would like to be considered for final allotment in order of preferences in case he/she is recommended by the Staff Selection Commission.  Allocation of Posts to the selected candidates will be made strictly keeping in view their position in the merit list and the order of preference, subject to number of vacancies available in that post. The posts for the purpose are grouped and codes as below:- Code. Post A JE(Civil) Central Water Commission B JE(Mechanical) Central Water Commission C JE(Civil), CPWD D JE(Electrical), CPWD E JE(Civil), Department of Post F JE(Electrical), Department of Post G JE(Civil), Military Engineering Service H JE(Electrical and Mechanical), Military Engineering Service I JE(Quality Surveying and Contract), Military Engineering Service.
Candidates may note that options once exercised are final and no change will be allowed under any circumstance.
17
16. Admission to the Examination:
All candidates who apply in response to this advertisement by the CLOSING DATE will be assigned Roll numbers.  These will be communicated to them or placed on the website of the concerned Regional Office at least two weeks before the date of the examination.  A candidate must write his/her Roll number along with his/her name, date of birth and name of the examination while addressing any communication to the concerned regional office of the Commission. Communication from the candidate not furnishing these particulars shall not be entertained.
Admission Certificates (ACs) for the Examination indicating the time table and also venues of examination for each candidate will be issued to all applicants about two weeks before the date of examination. Candidates are required to download the admission certificate from the website of the regional/sub regional office concerned. It will not be sent by post. If any candidate does not receive admission certificate for the examination one week before the date of examination, he/she must immediately contact the concerned regional/sub regional office(s) of the commission with details such as registration id, transaction id of SBI, copy of challan etc. for obtaining the admission certificates. Failure to do so will deprive him/her of any claim for consideration.
The photographs used by the candidates must be a recent, relaxed face, colour picture and the picture should be in colour, against a light-coloured, preferably white, background. If flash is used then ensure that there is no red-eye and, in case of glasses, your eyes should be visible. The face should not  cover less than 80 % of the entire photo. Photograph should be of 8 bit JPG format and its size should be between 4kb to 12 kb with resolution of 100x120 (pixels).
Candidates should bring 3 passport size photographs for affixing it in the Commission’s copy of Admission Certificate in the presence of Invigilator, if required. Candidates not carrying photographs will not be allowed to appear in the examination. Candidate are advised to keep 10 copies of the same photograph, which was uploaded/affixed in the application form,  with them till the completion of entire examination process to facilitate easy identification.
17. Commission’s decision final:
The decision of the Commission in all matters relating to eligibility, acceptance or rejection of the applications, penalty for false information, mode of selection, conduct of examination(s) and interviews, allotment of examination centres, selection and allotment of posts/organizations to selected candidates will be final and binding on the candidates and no enquiry/correspondence will be entertained in this regard.
18. Action against candidates found guiltily of misconduct:
Candidates are warned that they should not furnish any particulars that are false or suppress any material information while filling in the application form. Candidates are also warned that they should in no case attempt to alter or otherwise tamper with any entry in a document or the attested certified copy submitted by them nor should they submit a tampered/fabricated document. If there is any inaccuracy or any discrepancy in filling OMR sheet, their answer sheet will not be evaluated.
Without prejudice to criminal action/debarment from Commission’s examination wherever necessary, candidature will be summarily cancelled at any stage of the recruitment in respect of candidates found have indulged in any of the following:-
18
In possession of mobile phone & accessories and other electronic gadgets within the premises of the examination centres, whether  in use or in switched off mode and on person or otherwise. Involved in malpractices:- Using unfair means in the examination hall. Obtaining support for his/her candidature by any means. Impersonate/Procuring impersonation by any person. Submitting fabricated documents or documents which have been tampered with. Making statements which are incorrect or false or suppressing material information. Resorting to any other irregular or improper means in connection with his/her candidature for the examination. Misbehaving in any other manner in the examination hall with the Supervisor, Invigilator or Commission’s representatives. Taking away the Answer sheet with him/her from the examination hall, or passing it on to unauthorised persons during the conduct of the examination. Intimidating or causing bodily harm to the staff employed by the Commission for the conduct of examination. To be ineligible for the Examination by not fulfilling the eligibility conditions mentioned in the Notice. Candidature can also be cancelled at any stage of the recruitment for any other ground which the Commission considers to be sufficient cause for cancellation of candidature.
19. Candidates who have not affixed their signature or LTI or who have not written or coded detailed such as Name, Roll Number and Test Form Numbers or not furnished the declaration/certificate on Page-I of the answer sheet will not be evaluated.
20. Courts Jurisdiction
Any dispute in regard to this recruitment will be subject to courts/tribunals having jurisdiction over the Headquarter of concerned Regional/Sub-Regional Office of the SSC where the candidate has submitted his/her application.
21. For detailed instructions relating to Application form, instructions for filling up the application form and for on-line payment/submission of application, candidates are advised to refer Annexures- I, II A and II B.
22. Important Instructions to Candidates:
(i) The Examination will comprise of a Written Examination followed by Interview.
(ii) The Commission will not undertake detailed scrutiny of applications for the eligibility and other aspects at the time of written examination and, therefore,   the application is accepted only provisionally. The candidates are advised to go through the requirements of educational qualification, age etc. and satisfy themselves that they are eligible before applying. Copies of supporting documents will be sought only from those candidates who qualify for the Interview. When scrutiny is undertaken, if any claim made in the application is not found substantiated, the candidature will be cancelled and the Commission‘s decision shall be final.
(iii) Candidates seeking reservation benefits available for SC/ST/OBC/PH/EXS must ensure that they are entitled to such reservation as per eligibility prescribed in the Notice .They should also be in possession of the certificates in the prescribed format in support of their claim .
19
(iv) Candidates with physical disability of 40% and more only would be considered as PHYSICALLY HANDICAPPED (PH) and entitled to reservation for PH.  The Posts are not identified suitable for VH persons.
(v) Central Government civilian employees claiming age relaxation should produce a certificate in the prescribed format from their office at the time of Interview/ document verification in respect of the length of continuous service which should be for not less than three years during the period immediately preceding the closing date for receipt of application. They should remain Central Government civilian employees till the time of appointment in the event of their selection.
(vi) FEE: Rupees one hundred ONLY (Rs. 100/-)
Women candidates and candidates belonging to Scheduled Caste, Scheduled Tribe, Physically Handicapped, and Ex-Servicemen (eligible for reservation) are exempted from paying application fee as per extant Government Orders.
(vii) CLOSING DATE :  10.08.2015 (upto 5.00 PM). Part-I registration upto 07-08-2015 (5.00PM) & Part-II registration upto 10-08-2015 (5.00 PM).
(viii) Only a single application will be entertained.  In case of multiple applications, the last application  for which Part-I and Part-II registration have been completed will be accepted.
(ix) Mobiles and other electronic gadgets are banned within the premises of the examination centres. possession of such equipment whether in use or in switch off mode, during the examination will be considered as use of unfair means. Candidature of such candidates will be cancelled. They will be liable for further action including initiation of criminal proceedings and debarment from commission’s examination upto 3 (three) years, as may be decided by the commission.
(x) Only online applications will be entertained for this recruitment. The facility of on-line application will be available from 11.07.2015 to 07.08.2015 (5.00 pm) for part-1 registration and upto 10.08.2015 (5.00 pm) for part II registration. Candidates should retain the registration number assigned to them online and details of payment of fee for further correspondence with the commission. They should not submit print outs of their application to the commission.
(xi) Candidates should bring 3 passport size colour photographs. Candidates not carrying photographs may not be allowed to appear in the written examination.
(xii) In case the scanned photograph(s) appearing in the Commission’s copy of Admission Certificate and or on Attendance Sheet is not clear invigilators are required to verify the identity of the Candidate with reference to the photo ID Proof and get colour photographs pasted on the Commission’s copy of Admission Certificate and or on  Attendance Sheet. Accordingly, candidates should bring passport size colour photographs for affixing it in the Commission’s copy of Admission Certificate in the presence of Invigilator. Candidates not carrying photographs will not be allowed to appear in the examination.
(xii) All the posts carry All India Service Liability (AISL) i.e. the candidate, on selection, may  be asked to serve anywhere in the country.
(xiii) No admission certificates for Paper-I& Paper-II will be issued by post. Candidates are required to download admission certificates for Paper-I &Paper-II from the web-site of Regional/Sub Regional offices.
Under Secretary (P&P)
20
Annexure – II A
BROCHURE
INSTRUCTIONS FOR FILLING UP THE APPLICATION
I.       The Commission uses standard application form for all its examinations.  Therefore, in your own interest please read the instructions given in the Notice of Examination and also given below carefully before filling up the application form. . II.        Use only blue/black ball pen to write in the boxes, i.e., III.     Instructions have been given for most items in the application itself which should be gone through carefully before filling up the boxes.  For items for which instructions are not available, further    instructions given below may be gone through carefully. IV.       Please go through the instructions given below for filling up each item numbered in the application form:- Column 1 and 2 :Name  of the  Examination Centre  and 2. Centre Codes Refer to para8 of the Notice of the Examination. Column 12, 12.1 &12.2:. Code for seeking age relaxation. Refer to para 4-A of the Notice of the Examination. Column13: Subjects for general engineering- choose your subject carefully. It cannot be changed later on. Column 14: Candidates should indicate whether they belong to one of the minority communities notified by Government namely Muslims, Christians, Sikhs, Buddhists, Zoroastrians (Parsis) or Jains. Column 15 Preference for Posts: You are advised to opt for such posts/Departments (Refer Para 15) for which you have the requisite qualification. You are also advised to be careful in exercising your preference as in the event getting selected you will be considered for the post and Department in order of your merit and option for each post. Option once exercised will be final and no changes/additions will be allowed under any circumstances. Column17: Educational Qualification and Subject Code:  See Annexure – VIII Use ‘Others’ if any particular Educational Qualification or Subject is not assigned a code. Column19: Address for communication Write your complete communication address including your Name in English in capital letters. Do not forget to write 6 digits PIN code in the boxes. All the correspondence will be made to this address. E-mail ids/mobile nos are used for communicating with the candidates in emergencies. It is in the interest of the candidates to furnish these details. Column 20: Photograph: Upload your recent photograph of size 4cmx5cm as per specification in paragraph 16 of the notice.
Box for Roll Number to be left unfilled (blank) by the candidate.
Column 22: Signature of Candidate
Unsigned application will be rejected summarily.
NOTE: Request for change/correction in any particulars in the Application Form, once submitted will not be entertained under any circumstances.
21
Annexure-II B
Procedure for Online Submission of Application
On-line application will be available as below:- Part-I Registration: Up to 5.00 PM on 07-08-2015. Part-II Registration: Up to 5.00 PM on 10-08-2015.
2.         The online submission of the application may be made at website http://ssconline.nic.in and http://ssconline2.gov.in Candidate should read the instructions in this Notice carefully before making any entry or selecting options. Candidate should supply all the required details while filling up the online form. Mandatory fields are marked with * (asterisk) sign. The filling of online application contains two parts: Part I Registration Part II Registration
3. In Part I registration, candidate will have to fill basic information. On submission of details, candidate shall be prompted to check the details and make any correction in the application.
4. Candidate should press “I agree” button after declaration once after he/she finds that information supplied by him/her is in order and no correction is required. Thereafter no correction/modification etc. shall be allowed.
5. Then a page with Registration No. shall be generated.  Note down registration number or take out the print out of the page. The application procedure is incomplete without part II registration. Part II registration requires filling of payment details, uploading of photograph and scanned signature.  Candidates may note that the Registration number given by the Commission and Transaction ID of the Bank should be properly entered in the relevant space, failing which it will not be possible to link the payment with Part I registration.  On-line application will be complete only if scanned signature and photo are uploaded as per instructions.
6. Those who want to pay online through SBI net banking/debit card/credit cards, can go directly to part II registration after completion of part I. Candidate will have to supply registration number and date of birth to continue to Part II registration.
7. To pay fee in cash, candidate  should  take print-out of challan generated online after completion of part I registration.  Deposit the requisite fee in pay branch of State Bank of India and then continue with the Part II registration.
8. Those who are exempted from payment of fee can skip steps 6 to 8.
9. Then upload a recently taken scanned photograph in 8 – bit  JPG format. The digital size of the file must be less than12 kb and greater than 4 kb and of resolution 100 pixel widths by 120 pixels height.
10. Then upload your scanned signature in 8 – bit  JPG format.  The digital size of the file must be less than 12 kb and greater than 1 kb and of resolution 140 pixel width by 60 pixels height. As per specifically mentioned in para 16 of the notice of the examination.
11. Candidates are advised to go through the instructions carefully before filling up the application form.
22
12. Request for change/correction in any particular in the Application Form shall not be entertained under any circumstances.  The Staff Selection Commission will not be responsible for any consequence arising out of non acceptance of any correction/addition/deletion in any particular filled in application form whatever the reasons may be.
23
ANNEXURE-III
FORM OF CERTIFICATE TO BE SUBMITTED BY CENTRAL GOVERNMENT CIVILIAN EMPLOYEES SEEKING AGE-RELAXATION
(To be filled by the Head of the Office or Department in which the candidate is working). (Please see Para 4(B) of the Notice) It is certified that *Shri/Smt./Km. ____________________________ is a Central Government Civilian employee  holding the post of  _________________________in the pay scale of Rs.______________________     with 3 years regular service in the grade.
There is no objection to his appearing for the Junior Engineers(Civil, Electrical etc.) Examination 2015 and/or interview cum personality test of the Examination.
Signature ___________________ Name        ___________________
Office  seal
Place: Date : (*Please delete the words which are not applicable.)
24
ANNEXURE- IV
Form of Certificate for serving Defence Personnel
I hereby certify that, according to the information available with me (No.) _____________________
(Rank) _______________________ (Name)____________________________ is due to complete
the specified term of his engagement with the Armed Forces on the (Date) ____________________.
(Signature of Commanding Officer) Office Seal:
Place: Date:
25
ANNEXURE-V
FORMAT FOR SC/ST CERTIFICATE
A candidate who claims to belong to one of the Scheduled Caste or the Scheduled Tribes should submit in support of his claim an attested/certified copy of a certificate in the form given below, from the District Officer or the sub-Divisional Officer or any other officer as indicated below of the District in which his parents (or surviving parent) ordinarily reside who has been designated by the State Government concerned as competent to issue such a certificate. If both his parents are dead, the officer signing the certificate should be of the district in which the candidate himself ordinarily resides otherwise than for the purpose of his own education. Wherever photograph is an integral part of the certificate, the Commission would accept only attested photocopies of such certificates and not any other attested or true copy.
(The format of the certificate to be produced by Scheduled Castes and Scheduled Tribes candidates applying for appointment to posts under Government of India)
This is to certify that Shri/Shrimati/Kumari* _________________________________son/daughter of  _______________________________________of village/town/*in District/ Division* _______________________ of the State/Union Territory* ____________________________belongs to the Caste/Tribe_________________________ which is recognized as a Scheduled Castes/Scheduled Tribes* under:-
The Constitution (Scheduled Castes) order, 1950 ___________________ The Constitution (Scheduled Tribes) order, 1950 ________________ The Constitution (Scheduled Castes) Union Territories order, 1951 * _______________ The Constitution (Scheduled Tribes) Union Territories Order, 1951*______________ As amended by the Scheduled Castes and Scheduled Tribes Lists(Modification) order, 1956, the Bombay Reorganization Act, 1960 & the Punjab Reorganization Act, 1966, the State of Himachal Pradesh Act 1970, the North-Eastern Area(Reorganization) Act, 1971 and the Scheduled Castes and Scheduled Tribes Order(Amendment) Act, 1976. The Constitution (Jammu & Kashmir) Scheduled Castes Order, 1956___________ The Constitution (Andaman and Nicobar Islands) Scheduled Tribes Order, 1959 as amended by the Scheduled Castes and Scheduled Tribes order (Amendment Act), 1976*. The Constitution (Dadra and Nagar Haveli) Scheduled Castes order 1962. The Constitution (Dadra and Nagar Haveli) Scheduled Tribes Order 1962@. The Constitution (Pondicherry) Scheduled Castes Order 1964@ The Constitution (Scheduled Tribes) (Uttar Pradesh) Order, 1967 @ The Constitution (Goa, Daman & Diu) Scheduled Castes Order, 1968@ The Constitution (Goa, Daman & Diu) Scheduled Tribes Order 1968 @ The Constitution (Nagaland) Scheduled Tribes Order, 1970 @ The Constitution (Sikkim) Scheduled Castes Order 1978@ The Constitution (Sikkim) Scheduled Tribes Order 1978@ The Constitution (Jammu & Kashmir) Scheduled Tribes Order 1989@ The Constitution (SC) orders (Amendment) Act, 1990@ The Constitution (ST) orders (Amendment) Ordinance 1991@ The Constitution (ST) orders (Second Amendment) Act, 991@ The Constitution (ST) orders (Amendment) Ordinance 1996
26
%2. Applicable in the case of Scheduled Castes, Scheduled Tribes persons who have migrated from one State/Union Territory Administration.
This certificate is issued on the basis of the Scheduled Castes/ Scheduled tribes certificate issued to Shri/Shrimati __________________________Father/mother ____________________________ of Shri/Srimati/Kumari*___________________________ of village/town*____________________ ___________________ in District/Division* ______________________of the State/ Union Territory*________________________________who belong to the _________________________________ Caste/Tribe which is recognized as a Scheduled Caste/Scheduled  Tribe in the State /Union Territory* issued by the___________________________________dated____________________________.
%3. Shri/Shrimati/Kumari and /or * his/ her family ordinarily reside(s) in village/ town*________________________________________ of ___________________ District/Division* _________________of the State/ Union Territory of ___________________________
Signature__________________________** Designation________________________ (with seal of office) Place______________ Date_______________
*    Please delete the words which are not applicable @  Please quote specific presidential order %  Delete the paragraph which is not applicable.
NOTE: The term “ordinarily reside(s)” used here will have the same meaning as in section 20 of the Representation of the People Act, 1950. ** List of authorities empowered to issue Caste/Tribe Certificates: (i) District Magistrate/ Additional District Magistrate/ Collector/ Deputy Commissioner/ Additional Deputy Commissioner/ Dy.Collector/ Ist Class Stipendiary Magistrate/Sub-Divisional Magistrate/Extra-Assistant Commissioner/Taluka Magistrate/Executive Magistrate. (ii) Chief Presidency Magistrate/Additional Chief Presidency Magistrate/Presidency Magistrate. (iii) Revenue Officers not below the rank of Tehsildar. (iv) Sub-Divisional Officers of the area where the candidate and/or his family normally resides.
NOTE: ST candidates belonging to Tamil Nadu state should submit caste certificate ONLY FROM THE REVENUE DIVISIONAL OFFICER.
27
ANNEXURE-VI
(FORMAT OF CERTIFICATE TO BE PRODUCED BY OTHER BACKWARD CLASSES APPLYING FOR APPOINTMENT TO POSTS UNDER THE GOVERNMENT OF INDIA)
This is to certify that Shri/Smt/Kumari ______________________________________son/ daughter of ___________________________________________ of village _______________________ ______________________________ District/Division _____________________ in the State ______________________________ belongs to the ______________________ Community which is recognized as a backward class under the Government of India, Ministry of Social Justice and Employment’s Resolution No.____________________________ dated _______________________*
Shri/Smt/Kumari____________________________ and/or his/her family ordinarily reside(s) in the ___________________________ District/Division of the __________________ State/Union Territory. This is also to certify that he/she does not belong to the persons/sections(creamy layer) mentioned in Column 3 of the Scheduled to the Department of Personnel and Training Government of India OM No.36012/22/93-Estt(SCT) dated 08-09-1993.**
District Magistrate _______________________________________
Deputy Commissioner etc__________________________________________
Dated
Seal
 The authority issuing the certificate may have to mention the details of Resolution of Government of India in which the caste of the candidate’s is mentioned as OBC. **   As amended from time to time.
Note : The term “Ordinarily used here will have the same meaning as in Section 20 of the Representation of the People Act 1950.
Note: The term “Ordinarily used here will have the same meaning as in Section 20 of the Representation of the People Act 1950.
28
Annexure-VII (FORM-II)
DISABILITY CERTIFICATE (IN CASE OF AMPUTATION OR COMPLETE PERMANENT PARALYSIS OF LIMBS AND IN CASES OF BLINDNESS) (See rule 4)
(NAME AND ADDRESS OF THE MEDICAL AUTHORTIY ISSUING THE CERTIFICATE)
Recent PP size Attested Photograph (showing face only) of the person with disability
Certificate No.                                                                            Date:
This is to certify that I have carefully examined
Shri/Smt/Kum_________________Son/wife/daughterof Shri ______________________
Date of Birth________________ Age _______________   years,
male/Female___________Registration No.___________________ permanent resident of Home
No.____________________Ward/Village/Street__________________Post
Office_______________ District_________State____________________.
Whose photograph is affixed above, and an satisfied that :
(A) he/she is a case of:  locomotor disability  blindness
(Please tick as applicable)
(B) the diagnosis in his/her case _____________________________
(A) He/She has __________________________% (in figure)___________________ percent(in
words) permanent physical impairment/blindness in relation to
his/her__________________(part of body) as per guidelines(to be specified).
29
2. The applicant has submitted the following document as proof of residence:-
Nature of Document Date of Issue Details of authority issuing
certificate.
(Signature and Seal of Authorsed Signatory of
notified Medical Authority)
Signature/Thumb impression of the person in whose favour disability certificate is issued.
30
Annexure-VII (FORM-III)
DISABILITY CERTIFICATE (In Case of  Multiple disabilities)
(NAME AND ADDRESS OF THE MEDICAL AUTHORTIY ISSUING THE CERTIFICATE) (See rule 4)
Recent PP size Attested Photograph (showing face only) of the person with disability
Certificate No.                                                                            Date:
This is to certify that I have carefully examined Shri/Smt/Kum_________________
Son/wife/daughter of Shri _________________________________________________
Date of Birth________________Age _______________   years,
male/Female___________
Registration No.___________________ permanent resident of Home No._____________________
Ward/Village/Street____________________Post Office_______________ District_____________
State____________________whose photograph is affixed above, and are satisfied that :
(A) He/She is a Case of Multiple Disability. His/her extent of permanent physical
impairment/disability has been evaluated as per guidelines(to be specified) for the
disabilities ticked below, and shown against the relevant disability in the table below:
S.No .
Disability Affected part of the body
Diagnosis Permanent physical impairment/mental disabilities(in %)
1. Locomotor disability @
2 Low vision #
3. Blindness Both Eyes
4. Hearing impairment $
5. Mental retardation X
6. Mental-illness X
31
(B) In the light of the above, his/her over all permanent physical impairment as per
guidelines ( to be specified) is as follows:-
In figure___________________ percent.
In words:_____________________________________________________ percent.
2.     This condition is progressive/non progressive/likely to improve/not likely to improve.
3. Reassessment of disability is:
(i) not necessary
Or
(ii) is recommended/after ____________ years___________ months, and therefore this
certificate shall be valid till ____________      _____________     _________________
(DD) (MM)                            (YY)
@ e.g. Left/Right/both arms/Legs
#    e.g. Single eye/both eyes
$   e.g. Left/Right/both ears.
4. The applicant has submitted the following document as proof of residence.
Nature of Document Date of issue Details of authority issuing
certificate
Signature and seal of the Medical Authority
Name and seal of Member Name and seal of Member               Name and seal of the Chairperson
Signature/Thumb impression of the person in whose favour disability certificate is issued.
32
Annexure-VII (FORM-IV)
DISABILITY CERTIFICATE (In case other than those mentioned in Forms II and III)
(NAME AND ADDRESS OF THE MEDICAL AUTHORTIY ISSUING THE CERTIFICATE) (See rule 4) Recent PP size Attested Photograph (showing face only) of the person with disability
Certificate No.                                                                            Date:
This is to certify that I have carefully examined
Shri/Smt/Kum________________________Son/wife/daughter-------------------------of-----
--------------------------------Shri-----------------Date of Birth________________ Age
_______________   years, male/Female___________ (DD/MM/YY)
Registration No.___________________ permanent resident of House No._____________________
Ward/Village/Street____________________Post Office_______________ District_____________
State____________________Whose photograph is affixed above, and an satisfied that
he/She is a Case of _________________disability. His/her extent of percentage physical
impairment/disability has been evaluated as per guidelines(to be specified) for the
disabilities (to be specified) and is shown against the relevant disability in the table below:-
S.No .
Disability Affected part of the body
Diagnosis Permanent physical impairment/mental disabilities(in %)
1. Locomotor disability @
2 Low vision #
3. Blindness Both Eyes
4. Hearing impairment $
5. Mental retardation X
6. Mental-illness X
(Please strike out the disabilities  which are not applicable)
33
(C) In the light of the above, his/her over all permanent physical impairment as per
guidelines ( to be specified) is as follows:-
In figure___________________ percent.
In words:_____________________________________________________ percent.
2.     This condition is progressive/non progressive/likely to improve/not likely to improve.
3. Reassessment of disability is:
(i) not necessary
Or
(ii) is recommended/after ____________ years___________ months, and therefore this
certificate shall be valid till ____________      _____________     _________________
(DD)                           (MM) (YY)
@ e.g. Left/Right/both arms/Legs
#    e.g. Single eye/both eyes
$   e.g. Left/Right/both ears.
4. The applicant has submitted the following document as proof of residence.
Nature of Document Date of issue Details of authority issuing
certificate
Signature and seal of the Medical Authority
Name and seal of Member Name and seal of Member               Name and seal of the Chairperson
Signature/Thumb impression of the person in whose favour disability certificate is issued.
34
ANNEXURE – VIII
Educational Qualification Code
Educational Qualification Code Diploma 04 BE 13 B.Tech. 14 AMIE (Part A & Part B) 15 B.Sc. (Engg.) 16 Graduation Certificate issued by Defence (Indian Army, Air Force, Navy) 19 PG Diploma 24 MA 25 M.Com. 26 M. Sc. 27 M.Ed. 28 LLM 29 ME 30 M. Tech. 31 M. Sc. (Engg.) 32 MCA 33 MBA 34 Others 35 Intermediate Examination in Buildings and Quantity Surveying Sub-Div.II of the Institute of Surveyors(India) 36 Direct Final Examination in Buildings and Quantity Surveying Sub.Div.II of the Institute of Surveyors (India) 37
35
Annexure-IX
Subject Code for Educational Qualification
Subject of Educational Qualification Code Civil Engineering 16 Electrical Engineering 17 Mechanical Engineering 18 Electronics Engineering 19 Electronics & Power Engineering 20 Electronics & Communication Engineering 21 Electrical and Instrumentation Engineering 22 Agriculture Engineering 23 Computer Science 24 Computer Application 25 Information Technology 26 Others 48 Electrical & Electronics Engineering 49 Electrical/Power Engineering 50 Civil & Structural  Engineering 51 Civil  and Rural Engineering. 52 Mechanical Engineering with specialization in Production Engineering 53
Mechanical Engineering with specialization in Power Plant Engineering. 54 Mechanical Engineering with specialization in Tool Tech Engineering. 55 Civil Engineering with specialization in Architecture & Town Planning. 56 Civil Engineering with specialization in Public Health Engineering. 57 Civil Engineering (N.C) 58 Civil Engineering (Water & Power Resources) 59 Civil Engineering (Water Resources) 60 Civil Engineering (Construction) 61 Civil Engineering (Environmental Pollution & Control) 62 Mechanical Engineering (Production) 63 Mechanical Engineering (Maintenance) 64 Mechanical Engineering (Automobile) 65 Post Graduation in Engineering 66 Building & Quantity Surveying 67
36
Annexure-X
List of Equivalent Qualifications S.No. Subject   (Degree/ Diploma) 1 AMIE (Section A&B) in Civil/Electrical/Mechanical Engg. of Instt. of Engineers (India) 2 Diploma in Electrical & Electronics Engineering 3 B.E. (Electrical/Power) 4 Diploma in Civil & Structural  Engineering 5 Degree/Diploma in Civil  and Rural Engineering. 6 B.Sc (Civil Engineering) 7 Diploma in Mechanical Engineering with specialization in Production Engineering. 8 Diploma in Mechanical Engineering with specialization in Power Plant Engineering. 9 Diploma in Mechanical Engineering with specialization in Tool Tech Engineering. 10 Diploma in Civil Engineering with specialization in Architecture & Town Planning. 11 Diploma in Civil Engineering with specialization in Public Health Engineering. 12 Diploma in Civil Engineering (N.C) 13 Diploma in Civil Engineering (Water & Power Resources) 14 Diploma in Civil Engineering (Water Resources) 15 Diploma in Civil Engineering (Construction) 16 Diploma in Civil Engineering (Environmental Pollution & Control) 17 Diploma in Mechanical Engineering (Production) 18 Diploma in Mechanical Engineering (Maintenance) 19 Diploma in Mechanical Engineering (Automobile)